21. Place two 9" pieces of decorative tape RST and 28. Join the sleeve upper and lower RST along one seam whipstitch together along one long edge to make only. Press seams toward the lower sleeve and overcast. the decorative tape double wide. Open out and 29. Press up ⅛" at the lower edge of the sleeve to the press flat. Sew this piece of decorative tape on the right side and sew decorative tape over the lower right side of the lower edge the bodice and skirt sleeve. Fold sleeve RST and sew remaining seam. covering the waistline seams and white twill tape, 30. Sew the sleeve into the jacket armhole. There will be turning back at the ends to the inside at the CB. Sew little easing at the sleeve cap. Trim seam to ⅛" and with running stitches on upper and lower edges to tightly overcast. secure to the bodice. 22. Sew 2 hooks and thread bars at bodice CB for closure. 23. Sew small buttons on the overskirt evenly spacing 5 buttons on each of the decorative tape strips. Refer to photos for placement. 31. On the right side, place decorative tape over the sleeve seam and stitch in place with small running stitches. 32. Sew a small button and thread loop at neck of jacket front. Jacket: 24. Join the jacket front to back along the short-curved seam on the back. Press seam toward the front, trim to ⅛" and overcast. 25. Join shoulder seams and press toward the back. Trim to ⅛" and overcast. 26. Press ⅛" to the right side all the way around the jacket and baste. 27. Sew the entire edge of jacket with decorative tape sewing close to both edges with a short running stitch. Information on the doll used for pattern design: Reproduction Rohmer doll "Leontine" with cup and saucer neck on leather body Total doll height from top of head to bottom of foot: 16 inches Body height: 13 inches Head circumference: 6.75 inches Chest circumference: 8.5 inches Waist measurement: 6.5 inches Hip measurement: 10.5 inches Arm length from shoulder: 6.25 inches Foot size: 1.75 inches long x .75 inches wide 32 Summer 2017